# Gas powered post pounder: which one fits your posts | RediDriver

> A gas powered post pounder, also called a post driver, with a Honda four stroke on board: no compressor, hose or cord. Which RediDriver fits your posts.

Source: https://redidriver.com/answers/gas-powered-post-pounder/

---

The short answer

### A post driver with its own engine

A post pounder and a post driver are two names for the same tool: a hammer that drives the post into the ground for you. A RediDriver is a **gas powered post pounder** . A Honda four stroke on the machine runs the hammer, so one person carries it from post to post and drives from ground level, with no air compressor, no hose and no cord.

26 to 30 joules a blow, at 1720 BPM to 1780 BPM, from a machine that weighs 32 lbs to 39 lbs. Straight unleaded gas, no mixing. Recoil start, and every model is inclinable, so the engine runs at any angle.

| Driver | Joules | Impact rate | Weight | Guide tube | Engine |
| --- | --- | --- | --- | --- | --- |
| [MEGAmulti](https://redidriver.com/product/redi-driver-megamulti/) | 30 | 1780 BPM | 39 lbs | Multiple profiles | Honda GX50 |
| [REDIboss78](https://redidriver.com/product/rediboss78-post-driver-with-3-1-8-id-guide-tube/) | 26 | 1740 BPM | 35 lbs | 3 1/8" | Honda GX35 |
| [REDIclassic52](https://redidriver.com/product/rediclassic52-with-2-id-guide-tube/) | 26 | 1720 BPM | 32 lbs | 2" | Honda GX35 |

← swipe the table

Pick by the post

### Which pounder for which post

The guide tube decides what a driver can take, so the post picks the machine. This is the same post map the shop uses on the phone.

| Post | Driver | Also needed |
| --- | --- | --- |
| T-posts Steel fence posts | [REDIboss78 post driver with 3 1/8” ID guide tube](https://redidriver.com/product/rediboss78-post-driver-with-3-1-8-id-guide-tube/) | [1 3/4" Reducer sleeve for REDIboss78](https://redidriver.com/product/1-3-4-reducer-sleeve-for-rediboss78/) The 1 3/4" reducer sleeve. Keeps the T-post centred in the 3 1/8" tube. |
| All posts under 2" Wood, steel, round | [REDIclassic52 with 2” ID guide tube](https://redidriver.com/product/rediclassic52-with-2-id-guide-tube/) | [13/16" Reducer sleeve for REDIclassic52](https://redidriver.com/product/13-16-reducer-sleeve-for-rediclassis52/) Only if you are driving rods or rebar. Posts run straight down the 2" tube. |
| 2 3/8" pipe Round steel post | [REDIboss78 post driver with 3 1/8” ID guide tube](https://redidriver.com/product/rediboss78-post-driver-with-3-1-8-id-guide-tube/) | [REDIcap78](https://redidriver.com/product/redicap78/) Protects the top of the post. Recommended for tubing and other thin-wall pipe. |
| 3" round posts Corral, pipe fence | [RediDriver MEGAmulti](https://redidriver.com/product/redi-driver-megamulti/) | Nothing extra |
| Postmaster / square All profiles | [RediDriver MEGAmulti](https://redidriver.com/product/redi-driver-megamulti/) | Nothing extra |
| 4" posts Large sign, dock piling | [RediDriver Commercial / DOT package](https://redidriver.com/product/redi-driver-commercial-dot-package/) | [REDIcap105](https://redidriver.com/product/redicap105/) The 4" cap is required for steel pipe. |
| U-channel Sign posts, 2 to 4 lb | [REDIboss78 post driver with 3 1/8” ID guide tube](https://redidriver.com/product/rediboss78-post-driver-with-3-1-8-id-guide-tube/) | [REDIguide78slit guide tube with slits](https://redidriver.com/product/rediguide78slit-guide-tube-with-slits/) For 2 lb U-channel.
[REDImultiadapter - EXCLUSIVE to RediDriver](https://redidriver.com/product/redimultiadapter-exclusive-to-redi-driver/) For 3 lb and 4 lb U-channel. |
| Carsonite types Flexible guide posts | [REDIboss78 post driver with 3 1/8” ID guide tube](https://redidriver.com/product/rediboss78-post-driver-with-3-1-8-id-guide-tube/) | [REDIcarsoniteadapter for guide posts](https://redidriver.com/product/rediguideadapter-for-guide-posts/) Purpose-built for Carsonite-type posts. |
| Rods & rebar Grounding, stakes | [REDIclassic52 with 2” ID guide tube](https://redidriver.com/product/rediclassic52-with-2-id-guide-tube/) | [13/16" Reducer sleeve for REDIclassic52](https://redidriver.com/product/13-16-reducer-sleeve-for-rediclassis52/) The REDIclassic52 rod sleeve. Mandatory for rods and rebar in the 2" tube. |

← swipe the table

Own one already, or want the full list of sleeves and caps? [Find what fits](https://redidriver.com/find-what-fits/) names every part for your post, and the [compatibility chart](https://redidriver.com/compatibility/) shows every part against every driver.

Before you buy

### What comes with every one

- Three years on the driver components, three times the industry standard, with no registration. The Honda engine carries Honda’s own 1 or 2 year warranty. [Warranty](https://redidriver.com/warranty/)
- Made in the USA and shipped from Cheney, Washington. Free shipping on USA orders over $500, with a $50 surcharge to Alaska and Hawaii.
- Returns within two weeks for a refund; shipping costs are excluded. [Returns](https://redidriver.com/returns/)
- Over 100 dB, hearing protection required.
- Questions before you order: call [509-235-2780](tel:509-235-2780) , Monday to Friday, 8:00 AM to 3:00 PM Pacific. A person answers.

From the field

### What owners report

> Everyone was in awe of this new found tool. Over 150 posts were installed in less than an hour. The first posts the operators installed there were grins from ear to ear and it got hard to get the pounder away from them. This tool exceeded every expectation.

> We got them because my shoulders are shot from pounding posts the old way. But now I'm able to do more with bad shoulders than I could 20 years ago. And I'm hoping it keeps my kids from having the same problems later in life.

> With all the advancements today, I can't believe someone didn't come up with this before. A fence post driver that doesn't need a hose or a compressor. No more setting up the compressor, unwinding the hose, pounding a post or two, then moving the compressor. The Redi Driver rocks!

In their own words, from [The Field](https://redidriver.com/your-redidriver/).

Own a RediDriver? Tell other crews how it did on your ground: the posts, the soil, how many you drove.

[Review us on Google](https://search.google.com/local/writereview?placeid=ChIJ_ZfZiysryYARzu1TGqnMWuU)

Questions

### Asked and answered

Yes. Post pounder and post driver are two names for the same tool. A RediDriver is a gas powered post driver, also called a post pounder, made in the USA and shipped from Cheney, Washington.

No. A RediDriver carries its own Honda four stroke engine. There is no compressor, no hose and no cord, and it runs on straight unleaded gas with no mixing.

A RediDriver weighs 32 lbs (REDIclassic52) to 39 lbs (MEGAmulti). One person carries it from post to post.

Pick by post diameter. Under 2": the REDIclassic52. T-posts: the REDIclassic52 with no reducer, or the REDIboss78 with its 1 3/4" reducer sleeve. Up to 3" OD: the REDIboss78 or the MEGAmulti. Postmaster types and some square profiles: the MEGAmulti. 4" posts: the Commercial / DOT package.

[Compare the drivers](https://redidriver.com/specs/) [Check what fits](https://redidriver.com/compatibility/)

More answers
[Gas vs pneumatic vs hydraulic post drivers](https://redidriver.com/answers/gas-vs-pneumatic-vs-hydraulic-post-drivers/) [Driving T-posts in rocky ground](https://redidriver.com/answers/driving-t-posts-in-rocky-ground/) [T-post pounder: which gas driver and sleeve to use](https://redidriver.com/answers/t-post-pounder/) [Vineyard post driver: which model fits your posts](https://redidriver.com/answers/vineyard-post-driver/)
