# Gas vs pneumatic vs hydraulic post drivers | RediDriver

> How a gas powered post driver compares with pneumatic and hydraulic drivers: what powers each, what you carry, and where each one can reach.

Source: https://redidriver.com/answers/gas-vs-pneumatic-vs-hydraulic-post-drivers/

---

The short answer

### What powers each one

A **gas powered post driver**  carries its own engine. A RediDriver runs on a Honda four stroke, so one person starts it and walks from post to post with no hose, no compressor and no cord. A **pneumatic**  post driver is driven by air, so it needs an air compressor and a hose running back to it. A **hydraulic**  driver works from a machine, such as a skid steer, and goes where that machine can go.

|  | Gas (RediDriver) | Pneumatic | Hydraulic |
| --- | --- | --- | --- |
| Power | Honda engine on the driver | Air compressor | The machine it runs from |
| What comes to the post | The driver, 32 lbs to 39 lbs | The driver, the hose and the compressor | The machine |
| Hose or cord | None | Air hose | Machine mounted |
| Reach | Anywhere a person can walk | As far as the hose reaches | Where the machine fits |

← swipe the table

Gas

### What a RediDriver puts into a post

26 to 30 joules a blow, at 1720 BPM to 1780 BPM, from a machine that weighs 32 lbs to 39 lbs. Straight unleaded gas, no mixing. Over 100 dB, hearing protection required. Pick the model by post diameter, because the guide tube decides what it can drive.

| Driver | Joules | Impact rate | Weight | Guide tube | Engine |
| --- | --- | --- | --- | --- | --- |
| [MEGAmulti](https://redidriver.com/product/redi-driver-megamulti/) | 30 | 1780 BPM | 39 lbs | Multiple profiles | Honda GX50 |
| [REDIboss78](https://redidriver.com/product/rediboss78-post-driver-with-3-1-8-id-guide-tube/) | 26 | 1740 BPM | 35 lbs | 3 1/8" | Honda GX35 |
| [REDIclassic52](https://redidriver.com/product/rediclassic52-with-2-id-guide-tube/) | 26 | 1720 BPM | 32 lbs | 2" | Honda GX35 |

← swipe the table

From the field

### What owners report

> I've spent 30-plus years in the fencing industry and always wanted an easier way to drive posts. A pneumatic driver with hoses and a compressor is such a pain. Now there's Redi Driver. Light, self-contained, powerful, but without the extra equipment. Just walk from post to post!

> The ability to access all areas of a jobsite where we couldn't reach with a pneumatic hose makes for a more secure jobsite, and saves us time and money. Gas powered is definitely the way to go.

> We rebuilt a large corral system and used the REDI Driver to drive 3-inch posts 4 feet into the ground. We felt we could control the pipe and keep everything plumb much easier than with our skid steer.

In their own words, from [The Field](https://redidriver.com/your-redidriver/).

Own a RediDriver? Tell other crews how it did on your ground: the posts, the soil, how many you drove.

[Review us on Google](https://search.google.com/local/writereview?placeid=ChIJ_ZfZiysryYARzu1TGqnMWuU)

Questions

### Asked and answered

No. A RediDriver is fully self-contained. There is no hose, no compressor and no power cord. A Honda four stroke engine on the driver powers it.

A RediDriver hits with 26 joules on the REDIclassic52 and REDIboss78, and 30 joules on the MEGAmulti, at 1720 BPM to 1780 BPM.

Yes. One person carries a RediDriver from post to post and drives from ground level. The lightest model, the REDIclassic52, weighs 32 lbs.

[Compare the drivers](https://redidriver.com/specs/) [Check what fits](https://redidriver.com/compatibility/)

More answers
[Driving T-posts in rocky ground](https://redidriver.com/answers/driving-t-posts-in-rocky-ground/) [Gas powered post pounder: which one fits your posts](https://redidriver.com/answers/gas-powered-post-pounder/) [T-post pounder: which gas driver and sleeve to use](https://redidriver.com/answers/t-post-pounder/) [Vineyard post driver: which model fits your posts](https://redidriver.com/answers/vineyard-post-driver/)
