T-posts in rocky ground
Which driver and sleeve to use, and what owners report from rock, caliche and sandstone.
Which driver for T-posts
T-posts sit well under the REDIboss78’s 3 1/8" guide tube, so the 1 3/4" reducer sleeve keeps the post centred and driving straight. The REDIclassic52 needs no reducer for T-posts: they run straight down its 2" tube, and at 32 lbs it is the lightest machine to carry all day. For the hardest hit in the line, the MEGAmulti delivers 30 joules at 1780 BPM, and the REDIboss78’s 1 3/4" reducer sleeve fits it too.
| Driver | Joules | Impact rate | Weight | Guide tube | Engine |
|---|---|---|---|---|---|
| MEGAmulti | 30 | 1780 BPM | 39 lbs | Multiple profiles | Honda GX50 |
| REDIboss78 | 26 | 1740 BPM | 35 lbs | 3 1/8" | Honda GX35 |
| REDIclassic52 | 26 | 1720 BPM | 32 lbs | 2" | Honda GX35 |
← swipe the table
What the shop does say
- Over 100 dB, hearing protection required.
- Straight unleaded gas, no mixing, and 10W-30 engine oil.
- EP 0 low viscosity grease for the hammer and crank. Use only EP 0, do not substitute.
- Clean the driver after each use to clear dirt and debris. A full service is recommended once a year, especially with frequent use.
RediDriver has not published a step by step method for rock, and this page will not make one up. If your ground is unusual, call the shop on 509-235-2780, Monday to Friday, 8:00 AM to 3:00 PM Pacific. A person answers.
What owners report
The Texas Hill Country is gorgeous, but the ground is really rocky. I researched for months and found the golden tool: the RediDriver. It drives through caliche and hard ground and makes driving T-posts amazingly easier.
I absolutely love y'alls driver. I just drove 180 post 3' deep in that rock. Nobody could believe it.
The first driver has now driven over 7500 star pickets, 90 percent in hard rocky ground.
Using the RediDriver to pound in 2 7/8 pipe into sandstone on the CMR refuge.
In their own words, from The Field.
Own a RediDriver? Tell other crews how it did on your ground: the posts, the soil, how many you drove.
Review us on GoogleAsked and answered
On the REDIboss78, yes: the 1 3/4" reducer sleeve keeps a T-post centred in the 3 1/8" guide tube. On the REDIclassic52, no reducer is required for T-posts.
The REDIclassic52 drives T-posts with no reducer and is the lightest at 32 lbs. The REDIboss78 drives them with the 1 3/4" reducer sleeve and also handles posts up to 3" OD. The MEGAmulti hits hardest, at 30 joules.
No. REDIboss78 sleeves are cut for the 3 1/8" guide tube. The REDIclassic52 has a 2" guide tube and takes its own sleeves.
