🇺🇸 Free shipping on USA orders over $500 $50 surcharge to AK / HI 3 year warranty, 3× the industry standard Honda engine warranty 1–2 years Made in the USA · ships from Cheney, Washington
Answers

Gas powered post pounder

Post pounder or post driver, it is the same tool. Here is what puts the hit in a RediDriver, and which one fits your posts.

The short answer

A post driver with its own engine

A post pounder and a post driver are two names for the same tool: a hammer that drives the post into the ground for you. A RediDriver is a gas powered post pounder. A Honda four stroke on the machine runs the hammer, so one person carries it from post to post and drives from ground level, with no air compressor, no hose and no cord.

26 to 30 joules a blow, at 1720 BPM to 1780 BPM, from a machine that weighs 32 lbs to 39 lbs. Straight unleaded gas, no mixing. Recoil start, and every model is inclinable, so the engine runs at any angle.

DriverJoulesImpact rateWeightGuide tubeEngine
MEGAmulti301780 BPM39 lbsMultiple profilesHonda GX50
REDIboss78261740 BPM35 lbs3 1/8"Honda GX35
REDIclassic52261720 BPM32 lbs2"Honda GX35

← swipe the table

Pick by the post

Which pounder for which post

The guide tube decides what a driver can take, so the post picks the machine. This is the same post map the shop uses on the phone.

PostDriverAlso needed
T-posts Steel fence postsREDIboss78 post driver with 3 1/8” ID guide tube1 3/4" Reducer sleeve for REDIboss78 The 1 3/4" reducer sleeve. Keeps the T-post centred in the 3 1/8" tube.
All posts under 2" Wood, steel, roundREDIclassic52 with 2” ID guide tube13/16" Reducer sleeve for REDIclassic52 Only if you are driving rods or rebar. Posts run straight down the 2" tube.
2 3/8" pipe Round steel postREDIboss78 post driver with 3 1/8” ID guide tubeREDIcap78 Protects the top of the post. Recommended for tubing and other thin-wall pipe.
3" round posts Corral, pipe fenceRediDriver MEGAmultiNothing extra
Postmaster / square All profilesRediDriver MEGAmultiNothing extra
4" posts Large sign, dock pilingRediDriver Commercial / DOT packageREDIcap105 The 4" cap is required for steel pipe.
U-channel Sign posts, 2 to 4 lbREDIboss78 post driver with 3 1/8” ID guide tubeREDIguide78slit guide tube with slits For 2 lb U-channel.
REDImultiadapter - EXCLUSIVE to RediDriver For 3 lb and 4 lb U-channel.
Carsonite types Flexible guide postsREDIboss78 post driver with 3 1/8” ID guide tubeREDIcarsoniteadapter for guide posts Purpose-built for Carsonite-type posts.
Rods & rebar Grounding, stakesREDIclassic52 with 2” ID guide tube13/16" Reducer sleeve for REDIclassic52 The REDIclassic52 rod sleeve. Mandatory for rods and rebar in the 2" tube.

← swipe the table

Own one already, or want the full list of sleeves and caps? Find what fits names every part for your post, and the compatibility chart shows every part against every driver.

Before you buy

What comes with every one

  • Three years on the driver components, three times the industry standard, with no registration. The Honda engine carries Honda’s own 1 or 2 year warranty. Warranty
  • Made in the USA and shipped from Cheney, Washington. Free shipping on USA orders over $500, with a $50 surcharge to Alaska and Hawaii.
  • Returns within two weeks for a refund; shipping costs are excluded. Returns
  • Over 100 dB, hearing protection required.
  • Questions before you order: call 509-235-2780, Monday to Friday, 8:00 AM to 3:00 PM Pacific. A person answers.
From the field

What owners report

Everyone was in awe of this new found tool. Over 150 posts were installed in less than an hour. The first posts the operators installed there were grins from ear to ear and it got hard to get the pounder away from them. This tool exceeded every expectation.

Statz Bros. Fencing

We got them because my shoulders are shot from pounding posts the old way. But now I'm able to do more with bad shoulders than I could 20 years ago. And I'm hoping it keeps my kids from having the same problems later in life.

JJ WernerLance Creek, Wyoming

With all the advancements today, I can't believe someone didn't come up with this before. A fence post driver that doesn't need a hose or a compressor. No more setting up the compressor, unwinding the hose, pounding a post or two, then moving the compressor. The Redi Driver rocks!

Dalrip

In their own words, from The Field.

Own a RediDriver? Tell other crews how it did on your ground: the posts, the soil, how many you drove.

Review us on Google
Questions

Asked and answered

Yes. Post pounder and post driver are two names for the same tool. A RediDriver is a gas powered post driver, also called a post pounder, made in the USA and shipped from Cheney, Washington.

No. A RediDriver carries its own Honda four stroke engine. There is no compressor, no hose and no cord, and it runs on straight unleaded gas with no mixing.

A RediDriver weighs 32 lbs (REDIclassic52) to 39 lbs (MEGAmulti). One person carries it from post to post.

Pick by post diameter. Under 2": the REDIclassic52. T-posts: the REDIclassic52 with no reducer, or the REDIboss78 with its 1 3/4" reducer sleeve. Up to 3" OD: the REDIboss78 or the MEGAmulti. Postmaster types and some square profiles: the MEGAmulti. 4" posts: the Commercial / DOT package.